Kimyasal ve mekanik dayanımı son derece yüksek, zorlu atmosferik koşullara (su, UV, ısı), suya ve kimyasala karşı mükemmel dayanım gösteren bu ürün grubu jelkotlar marin, otomotiv, enerji ve yapı sektöründe, su kaydırakları, yüzme havuzları, saniter malzeme ve modüler kabin üretiminde güvenle kullanılmaktadır. Atmosferik koşullarda parlaklığını koruması, yapısal karakteri nedeniyle çatlamaması ve aşınmaya karşı yüksek dayanımı bu grup jelkotların en önemli özellikleridir. Bu grup içerisinde yer alan fırça ve püskürtme tipi jelkotlarımız İlkester yüksek performans pigment pastalar ile birlikte son derece uyumlu olup, birlikte sahip oldukları üstün nitelikleri ile aquapark - su kaydırakları, otomotiv ve marin sektörü gibi alanlarda özellikle tercih edilmektedir. Renklendirilmiş yüksek performans jelkotlar, nihai kullanıcıya sunulmadan önce İlkalem argesi tarafından ısı, su, ultraviyole (UV) ve kimyasal dayanım testlerinden geçirilmektedir
| GİN-3013 | ISO/NPG acrylic modified brush type gelcoat |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Used as finished gelcoat | Equipments for pools and waterparks | Chemical base | Isophthalic/NPG | Tensile strength (MPa) | 60 – 70 |
| Maximum UV resistance | Boats and other sea vehicles | Application | Brush Roller |
Tensile elongation (%) | 1,5 – 2,5 |
| High glossy surface | Car, bus and truck body parts | Viscosity (cps) | 8000 – 10000 | Tensile E-modulus (MPa) | 4000 – 4500 |
| High chemical resistance | Sanitary materials such as kitchen top,kitchen sink, bath tub |
Thixotropy | Yes | Flexural strength (MPa) | 110 – 120 |
| Ultimate resistance to atmospheric medium | Military and defense industry applications | Density(gr/cm3) 20°C | 1,11 – 1,13 | Hardness (barcol) | 30 - 40 |
| High resistance to hydrolysis | City furniture and surface coverings | Monomer content (%) | 32 – 36 | Heat distortion temperature (°C) | 95 – 97 |
| Gel time (min) | 10 – 20 (*) | Water absorption (mg) | 30 – 35 | ||
| Exothermic peak (°C) | 180 – 200 (*) | ||||
| Curing system (*) | 1% MEK P, pre-accelerated | ||||
| (**) Test applied as polyester after post cure application | |||||
Comments
Available in desired colors
| GİN-4013 | ISO/NPG acrylic modified spray-up gelcoat |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Used as finished gelcoat | Equipments for pools and waterparks | Chemical base | Isophthalic/NPG | Tensile strength (MPa) | 60 – 70 |
| Maximum UV resistance | Boats and other sea vehicles | Application | Spray-up | Tensile elongation (%) | 1,5 – 2,5 |
| High glossy surface | Car, bus and truck body parts | Viscosity (cps) | 2000 – 4000 | Tensile E-modulus (MPa) | 4000 – 4500 |
| High chemical resistance | Sanitary materials such as kitchen top,kitchen sink, bath tub |
Thixotropy | Yes | Flexural strength (MPa) | 110 – 120 |
| Ultimate resistance to atmospheric medium | Military and defense industry applications | Density(gr/cm3) 20°C | 1,09 – 1,11 | Hardness (barcol) | 30 - 40 |
| High resistance to hydrolysis | City furniture and surface coverings | Monomer content (%) | 41 – 45 | Heat distortion temperature (°C) | 95 – 97 |
| Gel time (min) | 10 – 20 (*) | Water absorption (mg) | 30 – 35 | ||
| Exothermic peak (°C) | 200 – 220 (*) | ||||
| Curing system (*) | 1% MEK P, pre-accelerated | ||||
| (**) Test applied as polyester after post cure application | |||||
Comments
Available in desired colors
| GİN-313 | ISO/NPG acrylic modified brush type gelcoat |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Used as finished gelcoat | Equipments for pools and waterparks | Chemical base | Isophthalic/NPG | Tensile strength (MPa) | 60 – 70 |
| Excellent resistance to cracking due to structural flexibility | Boats and other sea vehicles | Application | Brush Roller |
Tensile elongation (%) | 2 – 2,5 |
| Maximum UV resistance | Car, bus and truck body parts | Viscosity (cps) | 8000 – 1000 | Tensile E-modulus (MPa) | 3500 – 3500 |
| High glossy surface | Sanitary materials such as kitchen top,kitchen sink, bath tub | Thixotropy | Yes | Flexural strength (MPa) | 100 – 120 |
| High chemical resistance | Military and defense industry applications | Density(gr/cm3) 20°C | 1,11 – 1,13 | Hardness (barcol) | 35 - 40 |
| Ultimate resistance to atmospheric medium | City furniture and surface coverings | Monomer content (%) | 34– 38 | Heat distortion temperature (°C) | 83 – 85 |
| High resistance to hydrolysis | Gel time (min) | 10 – 20 (*) | Water absorption (mg) | 40 – 45 | |
| Exothermic peak (°C) | 165 – 195 (*) | ||||
| Curing system (*) | 1% MEK P, pre-accelerated | ||||
| (**) Test applied as polyester after post cure application | |||||
Comments
Available in desired colors
| GİN-413 | ISO/NPG acrylic modified spray-up gelcoat |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Used as finished gelcoat | Equipments for pools and waterparks | Chemical base | Isophthalic/NPG | Tensile strength (MPa) | 60 – 70 |
| Excellent resistance to cracking due to structural flexibility | Boats and other sea vehicles | Application | Spray-up | Tensile elongation (%) | 2 – 2,5 |
| Maximum UV resistance | Car, bus and truck body parts | Viscosity (cps) | 2000 – 4000 | Tensile E-modulus (MPa) | 3000 – 3500 |
| High glossy surface | Sanitary materials such as kitchen top,kitchen sink, bath tub | Thixotropy | Yes | Flexural strength (MPa) | 100 – 120 |
| High chemical resistance | Military and defense industry applications | Density(gr/cm3) 20°C | 1,09 – 1,13 | Hardness (barcol) | 30 - 40 |
| Ultimate resistance to atmospheric medium | City furniture and surface coverings | Monomer content (%) | 39 – 43 | Heat distortion temperature (°C) | 83 – 87 |
| High resistance to hydrolysis | Gel time (min) | 10 – 20 (*) | Water absorption (mg) | 40 – 42 | |
| Exothermic peak (°C) | 200 – 220 (*) | ||||
| Curing system (*) | 1% MEK P, pre-accelerated | ||||
| (**) Test applied as polyester after post cure application | |||||
Comments
Available in desired colors