In this group of resins high filler capacity type resins take place besides transparent casting types. Especially appropriate for the production of bath tubs, shower trays, wash basins, closets, bathroom/kitchen sinks and floor tiles.
| P-055 | 406 | ORTHO unsaturated polyester resin for casting applications |
| P-403 | 407 | ORTHO polyester resin for casting applications |
| INR-33 SC | 408 | ISO/NPG acrylic modified polyester resin for casting applications |
| P-053 | 343 | ORTHO unsaturated polyester resin for casting applications |
| P-104 | 346 | ORTHO unsaturated polyester resin for transparent casting applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | |||
|---|---|---|---|---|---|---|
| Medium reactivity | Transparent casting materials in small sizes (trinkets, small figurines, key chains) |
Chemical base | Orthophthalic | Tensile strength (MPa) | 50 – 60 | |
| Low volumetric shrinkage | Souvenir accessories | Application | Casting | Tensile elongation (%) | 1 – 2 | |
| Viscosity (cps) | 700 – 900 | Tensile E-modulus (MPa) | 3000 – 4000 | |||
| Thixotropy | No | Flexural strength (MPa) | 70 – 80 | |||
| Density(g/cm³) | 1,11 – 1,13 | Hardness (GYZJ 934-1) | 40 – 42 | |||
| Monomer content (%) | 33 – 35 | Heat distortion temperature (°C) | 76 – 79 | |||
| Acid value (mgKOH/g) | 18 – 30 | Water absorption (mg) | 39 – 41 | |||
| Gel time (min) | 8 – 12 (*) | |||||
| Exothermic peak (°C) | 170 – 180 (*) | |||||
| Curing system (*) | 1% Co(1%) + 1% MEK P | (**) Test applied after post cure application | ||||