Sahip olduğu kimyasal yapısı, yüksek HDT ve mekanik değerleri sayesinde yüksek ısıya, kimyasal ve korozif ortamlara karşı dayanım gösteren bir reçine türüdür. İçerisine uygulanan UV katkısı ile güneş ışınlarına karşı da dayanıklı bir yapı sağlanabilmektedir. Bu grup içerisinde yer alan reçineler, kimyevi madde depoları, nakil boruları, yakıt, pis su ve çeşitli atık maddeler için stoklama depoları, nakliye tankı, deniz araçları üretiminde, savunma ve enerji sanayinde geniş kullanım alanına sahiptir.
| IR-100 | ISO thixotropic unsaturated polyester resin for GRP applications |
| IR-110 T | ISO thixotropic unsaturated polyester resin for GRP applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| High UV and environmental strength | Pools and water slide equipments | Chemical base | Isophthalic | Tensile strength (MPa) | 55- 65 |
| High mechanical strength and HDT | Car, bus and truck body parts | Application | Hand lay-up Spray-up |
Tensine elongation (%) | 1-2 |
| Resistant to chemical environment | Boats and other sea vehicle | Viscosity (cps) | 500 - 1000 | Tensile E-modulus (MPa) | 4000-5000 |
| Easy and quick fiber wetting | Chemical material storage tanks | Thixotropy | Yes | Flexural strength (MPa) | 95 - 105 |
| No dripping during vertical application |
GRP pipes | Density(gr/cm3) 20°C | 1,07 - 1,09 | Hardness (GYZJ 934-1) | 40 - 42 |
| Pool filters | Monomer content (%) | 43 – 45 | Heat distortion temperature (C) | 85 - 88 | |
| Construction materials | Acid value (mgKOH/g) | 11 - 20 | Water absorption (mg) | 33 - 35 | |
| Gel time (min) | 10 - 18 (*) | ||||
| Exothermic peak (C) | 170 - 180(*) | ||||
| Curing system (*) | 1% Co(1%)+1%MEK P | (**) Test applied after post cure application | |||
| PV-300 | Bisphenol-A epoxy vinylester thixotropic resin for GRP applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Easy and quick fiber wetting | Boats, yachts and other sea vehicles | Chemical base | Vinyl ester | Tensile strength (MPa) | 70 - 80 |
| Low volumetric shrinkage | Wind turbine blades | Application | Hand lay-up Spray-up Filament winding |
Tensine elongation (%) | 2,5 - 3,5 |
| Resistance to high temperatures and different thermal environment |
Chemical material storage tanks | Viscosity (cps) | 400- 500 | Tensile E-modulus (MPa) | 3000-4000 |
| High corrosion resistance in a wide variety of acidic and alkaline medium |
Transportation tanks, pipes and fittings | Thixotropy | No | Flexural strength (MPa) | 150 - 160 |
| High mechanical strength and HDT | Special applications for military and defense industry |
Density(gr/cm3) 20°C | 1,05 - 1,07 | Hardness (GYZJ 934-1) | 30 - 32 |
| High resistance towards osmosis | Monomer content (%) | 42 – 44 | Heat distortion temperature (C) | 95 - 98 | |
| Acid value (mgKOH/g) | Max. 7 | Water absorption (mg) | 34 - 36 | ||
| Gel time (min) | 25 - 35(*) | ||||
| Exothermic peak (C) | 180 - 200 (*) | ||||
| Curing system (*) | 0.5% Co(6%)+2%MEK P | (**) Test applied after post cure application | |||
| PV-200 | Bisphenol-A epoxy vinylester resin for GRP applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Easy and quick fiber wetting | Boats, yachts and other sea vehicles | Chemical base | Vinyl ester | Tensile strength (MPa) | 70 - 80 |
| Low volumetric shrinkage | Wind turbine blades | Application | Infusion Hand lay-up Filament winding |
Tensine elongation (%) | 2,5 - 3,5 |
| Resistance to high temperatures and different thermal environment |
Boats and other sea vehicle | Viscosity (cps) | 150- 200 | Tensile E-modulus (MPa) | 3000-4000 |
| High corrosion resistance in a wide variety of acidic and alkaline medium |
Chemical material storage tanks | Thixotropy | No | Flexural strength (MPa) | 150 - 160 |
| High mechanical strength and HDT | Transportation tanks, pipes and fittings | 1,05 - 1,06 | Hardness (GYZJ 934-1) | 30 - 32 | |
| High resistance towards osmosis | Special applications for military and defense applications |
Monomer content (%) | 43 – 45 | Heat distortion temperature (C) | 95 - 98 |
| Construction materials | Acid value (mgKOH/g) | Max. 7 | Water absorption (mg) | 34 - 36 | |
| Gel time (min) | 20- 30(*) | ||||
| Exothermic peak (C) | 160 - 170 (*) | ||||
| Curing system (*) | 0.5% Co(6%)+2%MEK P | (**) Test applied after post cure application | |||